Tips To Become A DIY Repair Master
Mastering the art of shelf and closet repair shouldn’t be too difficult for a first-timer. In fact, if you’re willing to learn the basics of repairing all of the broken shelves in your home, you would find that it only takes a few hours of your time. By remembering the following tips, you could definitely become your own DIY handyman by using only a few tools.
- First, accept the fact that all things deteriorate over time. Do not get frustrated when you see that the shelf you’ve worked on for so long has started to look rundown after a few years. Time is an incessant entity. Almost everything in your home will suffer from wear and tear. This is why many handymen would attest to learning basic DIY tricks in case of emergency.
- Assess the situation before you act. You might be tempted to drive to the nearest hardware store to purchase new tools, but at the end of the day, you’d want to save as much money as possible. It pays to examine broken shelves to see areas you’d need to work on. Not only does this help you avoid splurging on items you do not need, but it also allows you to discover other possible areas of improvement.
- Remember where you put everything. A handyman’s worst nightmare is the thought of losing a single screw. This is why they make sure to place even the smallest objects in places where they can easily be found. In your case, you may prepare small containers to temporary keep all the loose parts. For something cheaper, use a resealable plastic bag.
- Know your measurements. Always have a tape measure ready. When it comes to shelf repair, rely on center points and calculate the distance between the multiple shelves. This way, it’s easier to know which parts are sagging and which ones are straight. Use a pencil on the holes specially drilled onto the brackets, for instance. You’d find that it is easier than you think.
- Ever tried driving down a nail through a wood, only to have the wood split into two? Don’t worry. This is normal, especially for DIY newbies. The next time you plan to hammer a nail through a piece of wood, do this trick that handymen often do: turn the nail over and blunt the sharp edge by hammering on it a few times. The way it works is that a blunter edge would initially eliminate the fibers of the wood instead of splitting apart the entire piece. Remember this trick the next time you plan to do some custom shelving.
- Don’t be afraid to ask. There are plenty of handymen willing to lend a helping hand or two. Even if you want to do the repairs all by yourself, there will be times you’d get stuck on a particular method. When in doubt, call your nearest handyman and inquire on the necessary steps. Most of them will be able to guide you in every step of the way.